Dry Type 3 Phase Line Reactor AC 200A 75KW Copper Or Aluminum Material

Dry Type 3 Phase Line Reactor AC 200A 75KW Copper Or Aluminum Material

1. Brief Introduction

The product described here is a line reactor, which is also called input reactor. It is an electrical equipment that could be added in front of the drive to protect the variable-frequency drive (hereinafter referred to as VFD) and other electrical appliance or important components from current surges and transients. 

The three phase line reactor introduced is of 200A. It is applicable for a 75KW-VFD. The voltage could be 380V3P or 660V3P or it can be customized according to your needs. The material of the windings could be copper or aluminum. It depends on your own request.

A line reactor is an inductor, a coil of wire that forms a magnetic field as current flows through it. The magnetic field helps to reduce harmonics generated by current surge and current distortion and helps to avoid overvoltage tripping.

2. Main Parameters

3. Product Function

① A line reactor could limit the current surge effectively.

② It could limit the current and voltage spikes.

③ It can effectively limit the line distortion, thus reducing the harmonics in the circuits and making the line more sinusoidal.

④ It could protect the VFD and improve the power factor.

4. Relevant Product Recommendation

① Load reactor or output reactor, which is used behind the VFD to protect the motor.

② Smoothing reactor.

③ Harmonic filter reactor.

④ Series reactor.

5. Our Services

① 12 months' warranty period is provided since you buy the product.

② As long as there is any problem, we would offer you fastest support when we get your feedback.

③ If you could not solve the problem after we provide solutions, we could help with the problem by video calling.

④ If the problem could not be resolved through video calling, we would consider helping you with the problem by site visiting.